In short
Blinking sensor light, door reversing, or a door that only closes while you hold the wall button: all three point to the photo-eye sensors. Clean and realign them first. If that doesn't work, call, and a technician in Farmington repairs the sensors and re-tests the opener's safety system.

Doors that won't close in Farmington
In Farmington village, inside the historic district, garages and carriage houses are far older than their openers, with stone or uneven floors that leave the sensors out of level. In Unionville, the old mill village on the river, compact garages and damp air are the usual factors. The West District and East Farmington Heights are hillier, with sloped drives that bring water and grit to the door. In the southern neighborhoods, newer attached garages are simply busy. Low winter sun along the Farmington River valley also catches west-facing doors late in the afternoon.
Why a garage door refuses to close
- Door starts down, then goes back up. Something is blocking, or seems to be blocking, the two safety sensors near the floor.
- Opener light blinks and the door stays open. The sensors have lost sight of each other: a bumped bracket, a dirty lens or a broken wire.
- Door closes only if you hold the wall button. That is the opener overriding its sensors. It tells you the sensors are the problem, and it is not a way to run the door day to day.
- Door closes, touches the floor and reopens. The travel or force setting is off, or the floor has heaved and the door thinks it hit something.
What you can safely try yourself
Clear the doorway, clean both sensor lenses, and check that the two sensors point at each other at the same height. A steady light on each side means they can see each other. If one keeps blinking after that, or the wires look damaged, leave it for the technician.
Never disconnect the sensors or move them up out of the doorway to get the door working. They are what stops the door from closing on a child, a pet or a car.
Fixing it properly
Most of these visits are short. Sensors are realigned or replaced as a matched pair, damaged wire is rerun and secured, and the opener's travel and force are set for your door. If the opener is old enough that it has no working safety reverse at all, the technician will say so and explain the options, and nothing is replaced without your say-so.
Around Farmington
- East Farmington Heights: Near the West Hartford line, mostly mid-century homes.
- Southern neighborhoods: Toward Plainville and New Britain, with 1960s-90s family homes.
See the full Farmington service area.